
If you are thinking about new siding, vinyl is almost certainly on your list. It is the most common siding in North Jersey for good reason. But vinyl siding prices vary a lot from one house to the next. Knowing what drives the cost helps you budget, compare estimates fairly and spot a quote that does not add up.
★★★★★ Garden State Home Exteriors has 400+ five-star reviews from New Jersey homeowners.
This guide walks through the factors that move the price of a vinyl siding project in New Jersey, with the typical ranges we have published before.
Typical Vinyl Siding Cost Ranges
Most New Jersey homeowners spend between $8,500 and $18,000 for full vinyl siding on a typical 1,200 to 2,000 square foot home. Broken down per square foot of wall:
- Installed (all-in): $7 to $12 per square foot
- Material only: $3 to $7 per square foot
- Labor only: $2.50 to $5.50 per square foot
For comparison, HomeAdvisor puts the national average for vinyl siding installation at about $10,800, with most projects between $6,100 and $16,000. North Jersey tends to run a bit higher than national averages, mainly because of labor costs.
These are ranges, not quotes. Your price depends on the factors below.
Factor 1: How Much Wall There Is
Square footage of wall is the biggest single cost driver. Note that this is wall area, not the living space on your tax bill. Gables, dormers and tall foundations all add siding.
| Home type | Approx. siding area | Low estimate | High estimate |
|---|---|---|---|
| Small Cape Cod or ranch | ~900 sq ft | $6,300 | $10,800 |
| Average two-story colonial | ~1,400 sq ft | $9,800 | $16,800 |
| Large two-story (4+ bedrooms) | ~2,000 sq ft | $14,000 | $24,000 |
| Large with complex trim or dormers | ~2,500+ sq ft | $17,500 | $30,000+ |
These ranges include removing the existing siding. Homes with lots of trim, several gables or custom window surrounds land toward the high end.
Factor 2: Panel Type and Thickness
Vinyl comes in different profiles and grades. Thicker panels cost more but stay flatter, resist wind better and hold up longer in sun and cold.
| Vinyl type | Thickness | Installed cost per sq ft | Good for |
|---|---|---|---|
| Standard lap / clapboard | .040″ | $6 to $9 | Budget-focused projects |
| Insulated vinyl | .046″ + foam | $8 to $13 | Comfort, stiffer panels |
| Vinyl shake / shingle | .044″ to .050″ | $7 to $11 | Cape Cods, gables, cottage styles |
| Vertical board and batten | .044″ | $7 to $10 | Farmhouse looks, accents |
| Premium designer vinyl | .055″+ | $11 to $16 | High-end curb appeal |
For New Jersey’s climate, we suggest at least .044″ panels. Thinner .040″ panels are more likely to warp, fade and flex, especially on sunny south-facing walls. Our guide on why cheap vinyl siding costs more later explains why the thinnest grade is rarely a savings.
About insulated vinyl
Insulated vinyl bonds a foam backer to each panel. The foam stiffens the panel, gets rid of the hollow sound when you tap it, and helps reduce energy loss through the wall. For older homes with drafty walls, the comfort gain can be worth the higher upfront price.
Factor 3: Labor and Home Complexity
Labor usually makes up 35 to 45 percent of a siding project. A simple box-shaped house goes faster than one with many corners, bump-outs and rooflines. Things that add labor:
- More outside and inside corners
- Dormers, gables and multiple roof levels
- Lots of windows and doors to trim around
- Third-story walls that need extra staging and safety gear
- Tight lots where materials are hard to move
A professional installation should include:
- Removal and disposal of the old siding
- Inspection of the sheathing for rot, mold or water damage
- House wrap or another moisture barrier
- Panel installation with proper expansion gaps
- Trim at windows, doors, corners and soffits
- Final cleanup and haul-away
Factor 4: Tear-Off and Hidden Damage
Removing old siding typically adds $1 to $2 per square foot for tear-off and disposal. Once the old siding is off, the contractor can see the sheathing. If there is rot or mold, that repair is usually scoped and priced separately.
A trustworthy contractor will stop, show you the damage and walk you through the options before continuing. Ask how this is handled before you sign, so there are no surprises.
Factor 5: Color, Style and Add-Ons
- Color: premium and darker colors often cost more than standard whites and tans.
- Profiles: shakes, board and batten, and designer profiles cost more than basic lap.
- Insulation: insulated panels add roughly $1 to $2 per square foot.
- Trim: wrapping or replacing window trim, corner boards and fascia adds material and labor.
One cost you do not need to budget for: siding replacement does not require a permit in New Jersey, so there is no permit fee.
Vinyl Compared With Other Materials
| Material | Installed cost per sq ft | Lifespan | Maintenance |
|---|---|---|---|
| Vinyl | $7 to $12 | 20 to 40 years | Very low |
| Fiber cement | $10 to $18 | 30 to 50 years | Low (repaint about every 10 years) |
| Wood clapboard | $10 to $20 | 20 to 40 years | High |
| Engineered wood | $8 to $14 | 20 to 30 years | Low to moderate |
| Stucco | $10 to $18 | 20 to 50 years | Moderate |
Vinyl’s mix of low upfront cost and almost no maintenance is why it is so popular here. It handles freeze-thaw cycles well, resists moisture and insects, and never needs painting. For a closer look at the trade-offs, see our siding materials comparison for New Jersey homes.
Is Vinyl Siding Worth It?
For most homeowners, yes. Remodeling magazine’s annual Cost vs. Value report has shown vinyl siding replacement recouping around 80 percent of its cost at resale, one of the stronger returns among exterior projects. Fresh siding also improves first impressions when buyers pull up to the house.
If the upfront cost is the hurdle, Garden State Home Exteriors offers 0% interest financing for up to two years, with no payments for the first 12 months.
How to Get an Accurate Estimate
Online calculators guess at wall area. The real number depends on gables, dormers, cutouts and trim, so the most reliable estimate comes from someone measuring your home in person. When comparing quotes:
- Make sure each one names the product line and thickness
- Check that tear-off, wrap, trim and cleanup are included
- Ask how rot repair is priced
- Compare the workmanship warranties
Our guide on how to choose a siding contractor lists more questions to ask.
Frequently Asked Questions
How long does vinyl siding installation take?
Most homes take 3 to 7 days, depending on size and complexity. Homes that need a lot of rot repair or new sheathing can take up to two weeks.
Do I need a permit to replace vinyl siding in New Jersey?
No. Siding replacement does not need a permit in New Jersey.
What thickness should I choose?
At least .044″ for standard panels. Insulated panels at .046″ or thicker perform well in our climate.
Can vinyl go over existing siding?
Technically, yes, but we generally do not recommend it. It adds weight, can trap moisture between layers, and hides damage that will keep getting worse. Removing the old siding gives a cleaner, longer-lasting job.
Does vinyl siding increase home value?
It can. National Cost vs. Value data has shown vinyl siding replacement recouping around 80 percent of its cost, and a fresh exterior helps buyer perception.
Get a Number for Your Home
The only way to know your real cost is to measure your house. We offer free, no-obligation written estimates and will walk you through every line item. Learn more about our siding installation and replacement, or schedule your free estimate.
Find a Siding Contractor in Your Town
We install, replace and repair siding across North Jersey. Pick your county to see siding in your town:
Bergen County
- Siding in Allendale
- Siding in Alpine
- Siding in Bergenfield
- Siding in Bogota
- Siding in Carlstadt
- Siding in Cliffside Park
- Siding in Closter
- Siding in Cresskill
- Siding in Demarest
- Siding in Dumont
- Siding in East Rutherford
- Siding in Edgewater
- Siding in Elmwood Park
- Siding in Emerson
- Siding in Englewood
- Siding in Englewood Cliffs
- Siding in Fair Lawn
- Siding in Fairview
- Siding in Fort Lee
- Siding in Franklin Lakes
- Siding in Garfield
- Siding in Glen Rock
- Siding in Hackensack
- Siding in Harrington Park
- Siding in Hasbrouck Heights
- Siding in Haworth
- Siding in Hillsdale
- Siding in Ho-Ho-Kus
- Siding in Leonia
- Siding in Little Ferry
- Siding in Lodi
- Siding in Lyndhurst
- Siding in Mahwah
- Siding in Maywood
- Siding in Midland Park
- Siding in Montvale
- Siding in Moonachie
- Siding in New Milford
- Siding in Northvale
- Siding in Oakland
- Siding in Old Tappan
- Siding in Oradell
- Siding in Palisades Park
- Siding in Paramus
- Siding in Park Ridge
- Siding in Ramsey
- Siding in Ridgefield
- Siding in Ridgefield Park
- Siding in Ridgewood
- Siding in River Edge
- Siding in River Vale
- Siding in Rochelle Park
- Siding in Rutherford
- Siding in Saddle Brook
- Siding in Saddle River
- Siding in Teaneck
- Siding in Tenafly
- Siding in Township of Washington
- Siding in Upper Saddle River
- Siding in Waldwick
- Siding in Wallington
- Siding in Westwood
- Siding in Wood-Ridge
- Siding in Woodcliff Lake
- Siding in Wyckoff
Passaic County
Essex County
- Siding in Belleville
- Siding in Bloomfield
- Siding in Caldwell
- Siding in Cedar Grove
- Siding in East Orange
- Siding in Essex Fells
- Siding in Fairfield
- Siding in Glen Ridge
- Siding in Irvington
- Siding in Livingston
- Siding in Maplewood
- Siding in Millburn
- Siding in Montclair
- Siding in Newark
- Siding in Nutley
- Siding in Orange
- Siding in Roseland
- Siding in Short Hills
- Siding in South Orange
- Siding in Verona
- Siding in West Orange
Morris County
Morris County